Книга: Embedded Linux Primer: A Practical, Real-World Approach

10.2.1. Configuring MTD

10.2.1. Configuring MTD

To use MTD with the Flash memory on your board, you must have MTD configured correctly. The following list contains the requirements that must be satisfied to configure MTD for your board, Flash, and Flash layout.

• Specify the partitioning on your Flash device

• Specify the type of Flash and location

• Configure the proper Flash driver for your chosen chip

• Configure the kernel with the appropriate driver(s)

Each of these steps is explored in the following sections.

Оглавление книги

Оглавление статьи/книги

Генерация: 1.083. Запросов К БД/Cache: 3 / 1
Вверх Вниз