Книги автора: Linux Network Administrator Guide, Second Edition
/ Книги автора: Linux Network Administrator Guide, Second Edition
Книга: Linux Network Administrator Guide, Second Edition
Preparing NFS
Preparing NFS
Before you can use NFS, be it as server or client, you must make sure your kernel has NFS support compiled in. Newer kernels have a simple interface on the proc filesystem for this, the /proc/filesystems file, which you can display using cat:
$ cat /proc/filesystems
minix
ext2
msdos
nodev proc
nodev nfs
If nfs is missing from this list, you have to compile your own kernel with NFS enabled, or perhaps you will need to load the kernel module if your NFS support was compiled as a module. Configuring the kernel network options is explained in the "Kernel Configuration" section of Chapter 3, Configuring the Networking Hardware.
Похожие страницы
- 14.8. Небезопасная NFS
- NFS Server Configuration
- NFS Client Configuration
- Preparing for Potential Hardware Problems
- Preparing and Using a Hardware Inventory
- Preparing for the Install Process
- 9.7.1. Root File System on NFS
- 12.3.3. NFS Server
- 12.3.4. Target NFS Root Mount
- 12.3.5. U-Boot NFS Root Mount Example
- 10.5.1 Preparing for RTOS
- Mounting an NFS Volume