Книга: Windows Server 2012 R2 Storage, Security, & Networking Pocket Consultant
Reactivating dynamic disks
Reactivating dynamic disks
If the status of a dynamic disk is Online (Errors) or Offline, you can often reactivate the disk to correct the problem. You reactivate a disk by following these steps:
1. In Disk Management, press and hold or right-click the dynamic disk you want to reactivate, and then tap or click Reactivate Disk. Confirm the action when prompted.
2. If the drive status doesn’t change, you might need to reboot the computer. If this still doesn’t resolve the problem, check for problems with the drive, its controller, and the cables. Also make sure that the drive has power and is connected properly.
Похожие страницы
- Dynamic Host Configuration Protocol
- Working with basic, dynamic, and virtual disks
- Rescanning disks
- 8.4. Настройка DHCP (Dynamic Host Configuration Protocol)
- 2.4.3. Dynamic Binding
- Using basic disks and partitions
- Using basic and dynamic disks
- Special considerations for basic and dynamic disks
- Moving a dynamic disk to a new system
- Managing virtual hard disks
- Analyzing and optimizing disks