Книга: Embedded Linux Primer: A Practical, Real-World Approach

6.6. Shutdown

6.6. Shutdown

Orderly shutdown of an embedded system is often overlooked in a design. Improper shutdown can affect startup times and can even corrupt certain file system types. One of the more common complaints using the EXT2 file system (the default in many desktop Linux distributions for several years) is the time it takes for an fsck (file system check) on startup after unplanned power loss. Servers with large disk systems can take on the order of hours to properly fsck through a collection of large EXT2 partitions.

Each embedded project will likely have its own shutdown strategy. What works for one might or might not work for another. The scale of shutdown can range from a full System V shutdown scheme, to a simple script to halt or reboot. Several Linux utilities are available to assist in the shutdown process, including the shutdown, halt, and reboot commands. Of course, these must be available for your chosen architecture.

A shutdown script should terminate all userspace processes, which results in closing any open files used by those processes. If init is being used, issuing the command init 0 halts the system. In general, the shutdown process first sends all processes the SIGTERM signal, to notify them that the system is shutting down. A short delay ensures that all processes have the opportunity to perform their shutdown actions, such as closing files, saving state, and so on. Then all processes are sent the SIGKILL signal, which results in their termination. The shutdown process should attempt to unmount any mounted file systems and call the architecture-specific halt or reboot routines. The Linux shutdown command in conjunction with init exhibits this behavior.

Оглавление книги


Генерация: 0.378. Запросов К БД/Cache: 2 / 0
поделиться
Вверх Вниз